22.34.040 Bulk requirements.
Bulk requirements, as provided in this chapter, establish density and dimensional standards for lots within the limited open space zoning district in the city. Bulk requirements include maximum lot coverage, maximum building height, minimum setbacks, and other similar standards. Bulk requirements, specified in MMC 22.16.040, apply to all lots within the limited open space zoning district.
A. Maximum Residential Density. Table 22.34.040(A): Allowed Residential Density establishes the maximum density for the limited open space zoning district. Maximum density shall be calculated pursuant to MMC 22.16.040(B).
|
Zoning District |
Maximum Density |
|---|---|
|
Limited Open Space (LS) |
0.20 dwelling units per acre (1 dwelling unit per each 5 acres) |
B. Street Frontage. Street frontage shall be in compliance with the provisions of MMC 22.16.040(C) and subject to the applicable bulk requirements found in MMC 22.16.040, Bulk requirements.
C. Lot Dimensions. Lot dimensions shall be in compliance with the provisions of MMC 22.16.040(D) and subject to the applicable bulk requirements found in MMC 22.16.040, Bulk requirements.
D. Yard Setbacks. Required yard setbacks shall be in compliance with the provisions of MMC 22.16.040(E) and subject to the applicable bulk requirements found in MMC 22.16.040, Bulk requirements.
E. Lot Coverage. Lot coverage shall be in compliance with the provisions of MMC 22.16.040(F) and subject to the applicable bulk requirements found in MMC 22.16.040, Bulk requirements.
F. Building Height. Building height and its measurement shall be in compliance with the provisions of MMC 22.16.040(G) and subject to the applicable bulk requirements found in MMC 22.16.040, Bulk requirements.
G. Limited Open Space Zoning District (LS). The following bulk requirements in Table 22.34.040(G): Limited Open Space Zoning District (LS) Bulk Requirements specifically apply to the LS zoning district. General information regarding bulk requirements is found in MMC 22.16.040, Bulk requirements.
|
Residential Density (1) |
|
|---|---|
|
Maximum Dwelling Units per Lot |
1 dwelling unit |
|
Maximum Allowed Density |
0.2 units per acre (1 dwelling unit per each 5 acres) |
|
Street Frontage (1) |
|
|
Minimum Street Frontage |
70 feet |
|
Minimum Street Frontage for Panhandle Lots |
20 feet |
|
Minimum Street Frontage for Cul-de-Sac Lots |
70 feet |
|
Minimum Street Frontage for Lots with Public Street Access from a Private Access Tract or Easement |
20 feet |
|
Lot Dimensions (1) |
|
|
Minimum Lot Width |
70 feet |
|
Minimum Front Yard Setback Width |
20 feet |
|
Minimum Side Yard Setback Width |
20 feet |
|
Minimum Setback Width for Corner Lot Side Yards Abutting a Street |
20 feet (2) |
|
Minimum Setback Width for Corner Lot Side Yards Not Abutting a Street |
20 feet (2) |
|
Minimum Rear Yard Setback Width |
20 feet |
|
Minimum Setback from Private Access Tracts |
10 feet |
|
Minimum Setback from Private Access Easements |
10 feet |
|
Lot Coverage (1) |
|
|
Maximum Lot Coverage |
30% |
|
Building Height (1) |
|
|
Maximum Building Height |
35 feet |
Table Notes:
1See MMC 22.16.040, Bulk requirements, for more information regarding the bulk requirements in the above table.
2On a corner lot, the yard adjacent to the widest dimension of the lot abutting a street is a side yard. The opposite yard is also a side yard.
(Ord. 005/2019 § 10 (Exh. B))