22.20.040 Bulk requirements.
Bulk requirements, as provided in this chapter, establish density and dimensional standards for lots within mixed use zoning districts in the city. Bulk requirements include maximum lot coverage, maximum building height, minimum setbacks, and other similar standards. Bulk requirements, specified in MMC 22.16.040, apply to all lots within the mixed use – general (MG), mixed use – neighborhood (MN), and mixed use – medical (MM) zoning districts.
A. Maximum Residential Density. Table 22.20.040(A): Allowed Residential Density establishes the minimum and maximum residential densities for mixed use zoning districts. Residential density shall be calculated pursuant to MMC 22.16.040(B).
Zoning District |
Minimum Density |
Maximum Density |
---|---|---|
Mixed Use – General (MG) |
12 dwelling units per acre |
25 dwelling units per acre |
Mixed Use – Neighborhood (MN) |
8 dwelling units per acre |
16 dwelling units per acre |
Mixed Use – Medical (MM) |
N/A |
N/A |
B. Street Frontage. Street frontage shall be in compliance with the provisions of MMC 22.16.040(C) and subject to the applicable bulk requirements found in MMC 22.16.040, Bulk requirements.
C. Lot Dimensions. Lot dimensions shall be in compliance with the provisions of MMC 22.16.040(D) and subject to the applicable bulk requirements found in MMC 22.16.040, Bulk requirements.
D. Yard Setbacks. Required yard setbacks shall be in compliance with the provisions of MMC 22.16.040(E) and subject to the applicable bulk requirements found in MMC 22.16.040, Bulk requirements.
E. Lot Coverage. Lot coverage shall be in compliance with the provisions of MMC 22.16.040(F) and subject to the applicable bulk requirements found in MMC 22.16.040, Bulk requirements.
F. Building Height. Building height and its measurement shall be in compliance with the provisions of MMC 22.16.040(G) and subject to the applicable bulk requirements found in MMC 22.16.040, Bulk requirements.
G. Mixed Use – General Zoning District (MG). The following bulk requirements in Table 22.20.040(G): Mixed Use – General Zoning District (MG) Bulk Requirements specifically apply to the MG zoning district. General information regarding bulk requirements is found in MMC 22.16.040, Bulk requirements.
Residential Density (1) |
Attached Dwelling Units |
Detached Dwelling Units |
Nonresidential Uses |
---|---|---|---|
Maximum Dwelling Units per Lot |
N/A (2) |
1 dwelling unit |
N/A |
Minimum Number of Attached Units |
3 dwelling units |
N/A |
N/A |
Minimum Allowed Density |
12 units per acre |
12 units per acre |
N/A |
Maximum Allowed Density |
25 units per acre |
25 units per acre |
N/A |
Street Frontage (1) |
Attached Dwelling Units |
Detached Dwelling Units |
Nonresidential Uses |
Minimum Street Frontage |
N/A |
30 feet |
N/A |
Minimum Street Frontage for Panhandle Lots |
20 feet |
20 feet |
20 feet |
Minimum Street Frontage for Cul-de-Sac Lots |
N/A |
30 feet |
N/A |
Minimum Street Frontage for Lots with Public Street Access from a Private Access Tract or Easement |
20 feet |
20 feet |
20 feet |
Lot Dimensions (1) |
Attached Dwelling Units |
Detached Dwelling Units |
Nonresidential Uses |
Minimum Lot Width |
N/A |
30 feet |
N/A |
Yard Setbacks (1) |
Attached Dwelling Units |
Detached Dwelling Units |
Nonresidential Uses |
Minimum Front Yard Setback Width |
10 feet |
10 feet |
10 feet |
Minimum Side Yard Setback Width |
5 feet |
5 feet |
5 feet |
Minimum Side Yard Setback Width for Attached Dwelling Units on the Attached Side(s) |
0 feet |
N/A |
N/A |
Minimum Side Yard Setback Width Attached Dwelling Units on a Side Abutting a ROW, Separate Detached Unit(s), or Different Zone |
10 feet |
N/A |
N/A |
Minimum Setback Width for Corner Lot Side Yards Abutting a Street (3) |
10 feet |
10 feet |
10 feet |
Minimum Setback Width for Corner Lot Side Yards Not Abutting a Street (3) |
5 feet |
5 feet |
5 feet |
Minimum Rear Yard Setback Width |
10 feet |
10 feet |
10 feet |
Minimum Setback from Private Access Tracts |
10 feet |
10 feet |
10 feet |
Minimum Setback from Private Access Easements |
10 feet |
10 feet |
10 feet |
Lot Coverage (1) |
Attached Dwelling Units |
Detached Dwelling Units |
Nonresidential Uses |
Maximum Lot Coverage |
100% |
70% |
100% |
Building Height (1) |
Attached Dwelling Units |
Detached Dwelling Units |
Nonresidential Uses |
Maximum Building Height |
45 feet |
35 feet |
45 feet |
Table Notes:
1See MMC 22.16.040, Bulk requirements, for more information regarding the bulk requirements in the above table.
2The maximum number of attached dwelling units per lot is the maximum number of dwelling units permitted by the maximum allowed density for the specific zoning district in which the dwelling units are located.
3On a corner lot, the yard adjacent to the widest dimension of the lot abutting a street is a side yard. The opposite yard is also a side yard.
H. Mixed Use – Neighborhood Zoning District (MN). The following bulk requirements in Table 22.20.040(H): Mixed Use – Neighborhood Zoning District (MN) Bulk Requirements specifically apply to the MN zoning district. General information regarding bulk requirements is found in MMC 22.16.040, Bulk requirements.
Residential Density (1) |
Attached Dwelling Units |
Detached Dwelling Units |
Nonresidential Uses |
---|---|---|---|
Maximum Dwelling Units per Lot |
N/A (2) |
1 dwelling unit |
N/A |
Minimum Number of Attached Units |
3 dwelling units |
N/A |
N/A |
Minimum Allowed Density |
8 units per acre |
8 units per acre |
N/A |
Maximum Allowed Density |
16 units per acre |
16 units per acre |
N/A |
Street Frontage (1) |
Attached Dwelling Units |
Detached Dwelling Units |
Nonresidential Uses |
Minimum Street Frontage |
N/A |
30 feet |
N/A |
Minimum Street Frontage for Panhandle Lots |
20 feet |
20 feet |
20 feet |
Minimum Street Frontage for Cul-de-Sac Lots |
N/A |
30 feet |
N/A |
Minimum Street Frontage for Lots with Public Street Access from a Private Access Tract or Easement |
20 feet |
20 feet |
20 feet |
Lot Dimensions (1) |
Attached Dwelling Units |
Detached Dwelling Units |
Nonresidential Uses |
Minimum Lot Width |
N/A |
30 feet |
N/A |
Yard Setbacks (1) |
Attached Dwelling Units |
Detached Dwelling Units |
Nonresidential Uses |
Minimum Front Yard Setback Width |
10 feet |
10 feet |
10 feet |
Minimum Side Yard Setback Width |
5 feet |
5 feet |
5 feet |
Minimum Side Yard Setback Width for Attached Dwelling Units on the Attached Side(s) |
0 feet |
N/A |
N/A |
Minimum Side Yard Setback Width Attached Dwelling Units on a Side Abutting a ROW, Separate Detached Unit(s), or Different Zone |
10 feet |
N/A |
N/A |
Minimum Setback Width for Corner Lot Side Yards Abutting a Street (3) |
10 feet |
10 feet |
10 feet |
Minimum Setback Width for Corner Lot Side Yards Not Abutting a Street (3) |
10 feet |
5 feet |
10 feet |
Minimum Rear Yard Setback Width |
10 feet |
10 feet |
10 feet |
Minimum Setback from Private Access Tracts |
10 feet |
10 feet |
10 feet |
Minimum Setback from Private Access Easements |
10 feet |
10 feet |
10 feet |
Lot Coverage (1) |
Attached Dwelling Units |
Detached Dwelling Units |
Nonresidential Uses |
Maximum Lot Coverage |
80% |
70% |
80% |
Building Height (1) |
Attached Dwelling Units |
Detached Dwelling Units |
Nonresidential Uses |
Maximum Building Height |
45 feet |
35 feet |
45 feet |
Table Notes:
1See MMC 22.16.040, Bulk requirements, for more information regarding the bulk requirements in the above table.
2The maximum number of attached dwelling units per lot is the maximum number of dwelling units permitted by the maximum allowed density for the specific zoning district in which the dwelling units are located.
3On a corner lot, the yard adjacent to the widest dimension of the lot abutting a street is a side yard. The opposite yard is also a side yard.
I. Mixed Use – Medical Zoning District (MM). The following bulk requirements in Table 22.20.040(I): Mixed Use – Medical Zoning District (MM) Bulk Requirements specifically apply to the MM zoning district. General information regarding bulk requirements is found in MMC 22.16.040, Bulk requirements.
Street Frontage (1) |
|
---|---|
Minimum Street Frontage |
N/A |
Minimum Street Frontage for Panhandle Lots |
20 feet |
Minimum Street Frontage for Cul-de-Sac Lots |
N/A |
Minimum Street Frontage for Lots with Public Street Access from a Private Access Tract or Easement |
20 feet |
Minimum Lot Width (1) |
|
Minimum Lot Width |
N/A |
Yard Setbacks (1) |
|
Minimum Front Yard Setback Width |
10 feet |
Minimum Side Yard Setback Width |
10 feet |
Minimum Setback Width for Corner Lot Side Yards Abutting a Street (2) |
10 feet |
Minimum Setback Width for Corner Lot Side Yards Not Abutting a Street (2) |
10 feet |
Minimum Rear Yard Setback Width |
10 feet |
Minimum Setback from Private Access Tracts |
10 feet |
Minimum Setback from Private Access Easements |
10 feet |
Lot Coverage (1) |
|
Maximum Lot Coverage |
80% |
Building Height (1) |
|
Maximum Building Height |
45 feet |
Table Notes:
1See MMC 22.16.040, Bulk requirements, for more information regarding the bulk requirements in the above table.
2On a corner lot, the yard adjacent to the widest dimension of the lot abutting a street is a side yard. The opposite yard is also a side yard.
(Ord. 005/2019 § 10 (Exh. B))